NEC T30A User Manual page 229

Code( )
H
Cannot execute calibration because picker has a
medium.
0070
(FRU)
Maintenance chassis, CONTROLLER BOARD
Cannot execute calibration because magazine is
not inserted.
0071
(FRU)
Maintenance chassis, CONTROLLER BOARD
Defect in calibration data.
(FRU)
0072
Maintenance chassis, CONTROLLER BOARD
Cannot detect I/O slot sensor open state in I/O
slot sense operation during calibration.
0073
(FRU)
I/O Slot Sensor, CONTROLLER BOARD
Cannot get/check medium and read barcode
because picker has a medium.
0074
(FRU)
Maintenance chassis, CONTROLLER BOARD
Cannot put medium because picker does not
have a medium.
0075
(FRU)
Maintenance chassis, CONTROLLER BOARD
Reserved
0076
Reserved
0077
Reserved
0078
Reserved
0079
Reserved
007A
Reserved
007B
Cannot eject medium because drive does not
become condition of EJECT after 200 seconds
007C in getting medium from drive.
(FRU)
Drive, CONTROLLER BOARD
Drive does not become condition of MOUNT
after 200 seconds in putting medium to drive.
007D (FRU)
Drive, Maintenance chassis, CONTROLLER
BOARD
Drive does not become condition of SET after 3
seconds in putting medium to drive.
007E (FRU)
Drive, Maintenance chassis, CONTROLLER
BOARD
In medium picking or putting, drive interface
error detected or drive is not connected.
007F (FRU)
Drive, Maintenance chassis, CONTROLLER
BOARD
Library error code (8/16)
Description
-202-
Panel
Indicator
1. To power cycle the library.
CHK 2. Unless calibration operated, this error
0070 does not occur.
1. To power cycle the library.
CHK 2. Unless calibration operated, this error
0071 does not occur.
1. To power cycle the library.
CHK
2. Unless calibration operated, this error
0072
does not occur.
To power cycle the library.
CHK
0073
1. Check picker if it has a medium.
CHK 2. To power cycle the library.
0074
1. Check picker if it has a medium.
CHK 2. To power cycle the library.
0075
－
－
－
－
－
－
1. To power cycle the library.
2. Move the medium manually via Web
CHK
or Operator Panel.
007C
3. Check the medium.
1. To power cycle the library.
2. Check the medium and exchange
CHK
medium.
007D
1. To power cycle the library.
2. Check the medium and exchange
CHK
medium.
007E
To power cycle the library.
CHK
007F
Action