NEC T30A User Manual page 247

AppendixD Tape Alert
D-1 Library Tape Alert
Code Flag
1 Library Hardware A
4 Library Hardware D
8 Library Maintenance
12 Library Stray Tape
13 Library Pick Retry
14 Library Place Retry
16 Library Door
17 Library Mailslot
18 Library Magazine
23 Library Scan Retry
27 Cooling Fan Failure
28 Power Supply
Contents - Action
Changer mechanism is having trouble communicating
with the internal drive
・Turn the power off and on again.
The changer mechanism has a hardware fault that is
not mechanically related or requires a power cycle to
recover
・Turn the power off and on again.
Library preventative maintenance required
・If it is detected the cleaning request, clean the drive.
Stray cartridge left in library after previous error recovery
・Please remove the tape cartridge from the drive.
Please refer to Section 4.7.2 if you take out in the
operation of the library apparatus.
・Turn the power off and on again.
Operation to pick a cartridge from a slot had to perform an
excessive number of retries before succeeding
・If events occur continues, call the maintenance staff.
Operation to place a cartridge in a slot had to perform
an excessive number of retries before succeeding
・If events occur continues, call the maintenance staff.
Changer door open prevents library functioning
・After storing the magazine, re-run the operation.
Mechanical problem with import/export mailslot
・Call to maintenance staff.
Library magazine not present.
・After storing the magazine, re-run the operation.
Operation to scan the bar code on a cartridge had to
perform an excessive number of retries before
succeeding
・Exchanger the barcode label.
・If events occur continues, call the maintenance staff.
One or more fans inside the library have failed. Internal
flag state only cleared when all fans are working again
・Call to maintenance staff.
Redundant power supply failure inside the library
subsystem
・Call to maintenance staff.
-220-