Moving The Library - NEC T30A User Manual

9.8 Moving the Library

Please follow the following procedure when moving or transporting this machine.
When shutting down the system, refer to "
1) [Login]. See Section 4.3Login for detail.
2) If there is a cartridge in the drive, first unload it (eject), and then move it to the magazine slot.
Either consult the back up software manual or use the front panel keys.（See "4.7.2Removing
from the drive
3) Remove the cartridge from magazine.(See "4.6.1Magazine
4) Execute [Shipping move] of [Commands] from operator panel.
5) Confirm the display of [Tighten the shipping Screw and Turn the Power] and tighten the screw
for transportation on the back of machine.
※ Do the following work even when you cannot tighten the screw.
6) Turn OFF the power switch of the machine.
7) Remove the AC Power Cable, Interface Cable.
Do not turn off the power switch of the machine if the interface is in inactive
state. If you turn off the power switch of the device while the bus is in active State,
there is a risk of data loss or unstable bus state. If the system needs to be switched
off and is still connected to the LAN, then contact the administrator before
switching off.
When you are transporting this machine, please re-pack it in the packaging material
and in the same way it was packed at the time of purchase. If you do not have the
packaging. material, then transport the machine in soft cushioning material in order
to protect from shocks.
"
-166-
the System
Starting
3.2
")
Operations
"