6.2 Basic Operation of encryption key management function
This chapter describes the most basic operations under the conditions below. If you want to perform
operations under other conditions, make sure that you fully understand the description in this chapter,
and then go to "Advanced Operations" .
[Conditions]
Item
Tape media in the Library
Key to be used
Sharing tape medium among multiple libraries
6.2.1 Setup
To set up the encryption key management function, perform the following procedure:
To set up the function
Enabling the encryption key management function
Registering (importing) the master key
Exporting (backing up) the master key
Registering the activation key
(See 6.2.1.1)
(See 6.2.1.3)
(See 6.2.1.4)
(See 6.2.1.5)
Done
Condition
All are LTO6 / LTO7 medium.
Master key only (Encryption keys are not used.)
Enabled by setting the same master key.
-128-