NEC T30A User Manual page 248

D-2 Drive Tape Alert
Code Flag
3 Hard Error
4 Media
5 Read Failure
6 Write Failure
7 Media Life
8 Not Data Grade
9 Write Protect
10 No Removal
11 Cleaning Media
12 Unsupported Format
15 Memory
Cartridge Failure
16 Forced Eject
17 Read Only Format
18 Tape
Corrupted
19 Nearing Media Life
20 Clean Now
21 Clean Periodic
Contents - Action
The operation has stopped because an error has occurred
while reading or writing data which the drive cannot correct.
・Call to maintenance staff.
Media can no longer be written or read or performance is
severely degraded.
・Exchange the tape cartridge.
The tape is damaged or the drive is faulty.
・Clean Drive.
・Exchange the tape cartridge.
・Call to maintenance staff.
The drive can no longer write data to the tape.・Clean Drive.
・Exchange the tape cartridge.
・Call to maintenance staff.
Media Life.
・Exchange the tape cartridge.
The cartridge is not data-grade.
・Exchange the tape cartridge.
The WRITE command was attempted to a write-protected
tape.
・After release of the write-protect, please try again.
・Exchange the tape cartridge.
A manual or software unload was attempted when Prevent
Media Removal was on.
・ Allow medium removal via Prevent/Allow Medium
Removal command.
The tape in the drive is a cleaning cartridge.
You attempted to load a cartridge with an unsupported tape
format.
・Exchange the tape cartridge.
Chip in The memory chip failed in the cartridge.
・Exchange the tape cartridge.
The operation has failed because the tape cartridge was
manually ejected while the tape drive was actively writing or
reading.
Media loaded is Read-Only format.
Directory The tape directory on the tape cartridge has been corrupted.
File search performance will be degraded. The tape directory
can be rebuilt by reading all the data on the cartridge.
・Exchange the tape cartridge if the phenomenon occurs
again.
Nearing media life
・Exchange the tape cartridge.
Clean now
・Clean Drive.。
Clean periodic
・Clean Drive.
-221-