Event Notifications Setup Window (Snmp); Figure 5-25 Snmp Setup - NEC T30A User Manual

5.6.5.7 Event Notifications setup window (SNMP)

[Configure Library] - [SNMP]
[Function]
This window is used to set the destination to notify the Library information via SNMP.
[Information]
(2)
(3)
(4)
(5)
1. SNMP Enabled
The SNMP function is made effective.
Trap is not transmitted in the state where SNMP Enabled is not checked.
Since a setup of Community of Agent Setting is indispensable, an SNMP function does not
become effective unless Community is set up.
2. Agent Setting
These are general settings for SNMP.
Community:
Set the SNMP's community name.
Name:
Set the device name.
(1)

Figure 5-25 SNMP setup

-109-
Service/Administrator
(6)