Statistics; Telnet Service Port; View Revision; Drive Replacement - NEC T30A User Manual

4.4.4.3 Statistics

This menu is used to check the statistics information in Library.
Submenu item
View Accessor Data
View Retry Data
View Error Data
Clear Accessor Data
Clear Retry Data
Clear Error Data

4.4.4.4 Telnet Service Port

This menu is used to enable and disable the TELNET port.

4.4.4.5 View Revision

This menu is used to check the firmware revision of the library and the installed drive.This menu is
used to check the firmware revision information of Library.

Table 4-28 Information to be displayed on View Revision

Submenu item
Library
Drive

4.4.4.6 Drive Replacement

This menu is used to exchange the drive.
Submenu item
Selection of the drive

Table 4-27 Information to be displayed on Statistics

Description
This checks the statistics information in the Accessor.
This checks the statistics information in the Retry.
This checks the statistics information in the Error.
This clears the statistics information in the Accessor.
This clears the statistics information in the Retry.
This clears the statistics information in the Error.
Description
vendor ID / product ID / Serial No / FW rev / mac address
vendor ID / product ID / serial No / FW rev / wwnodename /
wwportname
Description
Remove Drive
This is used to remove drive.
Restore Drive
This is used to restore drive.
It is chosen whether a drive serial number is succeeded after Restore
Drive selection.
-55-