I/O Station Operations - NEC T30A User Manual

4.6.2 I/O Station Operations

The I/O station dashes out to a device front side after pressing the enter button. Please
there must not be danger from which the hand is placed between the moving part, and
do not affix the hand to the magazine, and do not put the finger in the opening of the
magazine until the I/O station dashes out. Please push the magazine a little when the
finger is placed in the opening of the magazine by any chance and pull out the finger
while returning it.
1) [Login]. See Section 4.3Login for detail.
2) Push Magazine I/O station Unlock button.(refer to 1.3.3.2 Button )
3) The message of [Push Enter Key] is displayed in Library state on LCD screen
4) Push Enter button , and I/O station is opened.
5) Refer to the photo below before inserting.
6) Close I/O station.
7) Inventory automatically starts.
The I/O Station lock release is not done when set from the host to the state of Media Removal
Prevented.
Insert the cartridges correctly. If a cartridge is inserted in the wrong direction or
it is not fully inserted into the slot, the Library may not start, an error message
may be displayed, and the Accessor or cartridge may be damaged.
Don't lift the cover of the I/O station.
-68-