Replacing The Drive Fan - NEC T30A User Manual

10.11 Replacing the Drive fan

1. Remove the drive module whose drive fan is to be replaced, referring to "10.5
Module
".
2. Remove the screw anchoring the drive cover and demount the drive cover.
When removing the cover, it is necessary to open the left latch (shown below) a little in the
direction of the arrow to release the latch.
3. Loosen the two screws shown below, hold them, and pull the drive slowly toward you.
Draw out the drive until you feel resistance. Do not force it.
-181-
Replacing the Drive
Screw
Screws