Chapter5 Remote Manager Interface; Connection Configuration - NEC T30A User Manual

Chapter5 Remote Manager Interface

This chapter describes how to use the Library's Ethernet functions ((Remote Manager interface),
SNMP Agent, and email notification).

5.1 Connection Configuration

The following configuration is required when using Ethernet functions.
(1)General
・10BASE-T/100BASE-TX/1000BASE-T LAN(full duplex or half duplex is OK, Gateway is
accessible)
(2)Remote Manager Interface
Web browser
(3)SNMP function
SNMP Manager: Trap reception and MIB extraction by an MIB browser are enabled. Various
※ SNMP : Simple Network Management Protocol
(4)email notification
Mail server does not require SMTP authentication (mail servers that do require SMTP
authentication are not supported)
※ SMTP : Simple Mail Transfer Protocol
Web
Web
Web
browser
ブラウザ
ブラウザ
: Operation is confirmed with Internet Explorer 7 / Internet Explorer 8 /
Internet Explorer 9 / Internet Explorer 10 / Internet Explorer 11 / Firefox3.6.
settings are required to enable monitoring. (See the relevant software
manual for description of these settings.)
SNMP
SNMP
Manager
Manager
Library
-76-
email
Mail
email
notification
E-mail
server
E-mail
通知先
list
通知先
通知先
LAN
(10BASE-T/100BASE-TX/1000BASE-T)