Rebooting The Library; Figure 4-18 Reboot Library - NEC T30A User Manual

4.9 Rebooting the Library

If a reset is executed without first executing the following steps, the device and/or
cartridge may be damaged, and data may be lost.
A reboot (initialization) is required in the following cases.
・When a system administrator or maintenance engineer has ordered a reboot of the Library.
・When errors have occurred in the Accessor and/or drive.
The following describes the steps for rebooting the library.
1) [Login]. See Section 4.3Login for detail.
2) Make sure that all jobs have been completed. If the library is in online state, set it to offline.
See Section 4.5.4Switching between ONLINE
3) Select [Reboot Library] from [Commands].
4) The confirming message will appear.Setting is applied by selecting [Yes].
5) The library reboots.
and OFFLINE

Figure 4-18 Reboot Library

-74-
for details.