Confirmation Of Unit Setup; Activation On Modification Of Fc Port Configuration - NEC S2500 User Manual

2. Confirmation of Unit Setup

2.1

Activation on Modification of FC Port Configuration

If any of the items described in "1.2.2 FC Port Configuration" are modified, then activation is
required.
After selecting [3. PANEL] → [1. Port On/Off Switch], remove the check(s) of the selected port(s) to
set them to offline. Next, check the port(s) to be selected to set them online.
Set the on/off status of the host ports on the CONT card.
Port On/Off Switch Feature of Port On/Off with host (Only mounting ports appear.)
CONT0 HP0
CONT1 HP0
Remove the check of port to be deselected and click "SET" → Offline
Add a check for the port to be selected and click "SET" → Online
The unit OFF/ON can provide the same effect.
CONT0 HP1
CONT1 HP1
C-11