Damaged Machine Hazards; Component Damage Hazards; Battery Safety; Burn Hazards - Genie GS-1930 Operator's Manual

Sixth Edition • Ninth Printing

Damaged Machine Hazards

Do not use a damaged or malfunctioning machine.
Conduct a thorough pre-operation inspection of the
machine and test all functions before each work
shift. Immediately tag and remove from service a
damaged or malfunctioning machine.
Be sure all maintenance has been performed as
specified in this manual and the appropriate Genie
service manual.
Be sure all decals are in place and legible.
Be sure the operator's, safety and responsibilities
manuals are complete, legible and in the storage
container located on the machine.

Component Damage Hazards

Do not use any battery charger greater than 24V to
charge the batteries.
Do not use the machine as a ground for welding.
Part No. T107026

Battery Safety

Burn Hazards

Do not expose the batteries or the charger to water
or rain during charging.
Explosion Hazards
Component Damage Hazard
Do not use any battery charger greater than 24V to
charge the batteries.
GS-30 • GS-32 • GS-46 • GS-47
Operator's Manual
Work Area Safety
Batteries contain acid.
Always wear protective
clothing and eye wear when
working with batteries.
Avoid spilling or contacting
battery acid. Neutralize
battery acid spills with baking
soda and water.
Keep sparks, flames and
lighted tobacco away from
batteries. Batteries emit
explosive gas.
The battery tray should
remain open during the
entire charging cycle.
Do not contact the battery
terminals or the cable
clamps with tools that may
cause sparks.
17