Lockout After Each Use; Electrocution/Burn Hazards; Tip-Over Hazard; Lifting Hazard - Genie GS-1930 Operator's Manual

Operator's Manual
Work Area Safety

Electrocution/Burn Hazards

Connect the battery charger to a
grounded, AC 3-wire electrical
outlet only.
Inspect daily for damaged cords,
cables and wires. Replace
damaged items before operating.
Avoid electrical shock from contact with battery
terminals. Remove all rings, watches and other
jewelry.

Tip-over Hazard

Do not use batteries that weigh less than the
original equipment. Batteries are used as
counterweight and are critical to machine stability.
Each battery must weigh 65 lbs / 29.5 kg. Battery
tray including batteries must weigh a minimum of
335 lbs / 152 kg.
For GS-4047 machines, each battery must weigh
82 lbs / 37 kg. Battery tray including batteries must
weigh a minimum of 400 lbs / 181 kg.

Lifting Hazard

Use the appropriate number of people and proper
lifting techniques when lifting batteries.
18

Lockout After Each Use

1 Select a safe parking location—firm level
surface, clear of obstruction and traffic.
2 Lower the platform.
3 Turn the key switch to the off position and
remove the key to secure from unauthorized
use.
4 Charge the batteries.
GS-30 • GS-32 • GS-46 • GS-47
Sixth Edition • Ninth Printing
Part No. T107026