Genie GS-1930 Operator's Manual page 40

Operator's Manual
Inspections
Note: If the outrigger enable, foot switch (if
equipped) and extend buttons are released too
soon after the outriggers have contacted the
ground, a long beep will not be heard at the
platform controls and the outrigger indicator lights
will be solid green. If a long beep is not heard and
the outrigger indicator lights are solid green, this
condition may indicate the outriggers are not fully
deployed or the machine is not level.
87 Press and hold the function enable switch on
the control handle.
88 Slowly move the control handle in the direction
indicated by the blue arrow, then in the
direction indicated by the yellow arrow.
Result: The machine should not move in the
directions indicated by the blue and yellow
arrows.
89 Press and hold the function enable switch on
the control handle.
90 Press the thumb rocker switch on top of the
control handle in the direction indicated by the
blue and yellow triangles on the control panel.
Result: The steer wheels should not turn in the
directions indicated by the blue and yellow
triangles.
91 Raise the platform.
Result: The platform should raise to 32 ft /
9.8 m and stop.
92 Fully lower the platform.
38
93 Press and hold the outrigger enable button.
Result: The outriggers should not retract.
94 Press and hold the outrigger retract button.
Result: The outriggers should not retract.
95 Press and hold the outrigger enable button.
96 Press and hold the outrigger retract button.
Result: The outriggers should retract. The
individual outrigger indicator lights will turn
solid green as the corresponding outrigger
retracts.
97 Continue pressing the outrigger enable, foot
switch (if equipped) and the outrigger retract
buttons until the outriggers are completely
retracted. Release the outrigger enable and
outrigger retract buttons when all outrigger
indicator lights turn off. All functions are now
restored.
Note: If the outrigger enable, foot switch (if
equipped) and retract buttons are released too
soon during retraction, the outrigger indicator lights
will flash green, indicating the outriggers are not
fully retracted.
GS-30 • GS-32 • GS-46 • GS-47
Sixth Edition • Ninth Printing
Part No. T107026