Lifting Instructions; Center Of Gravity Table - Genie GS-1930 Operator's Manual

Sixth Edition • Ninth Printing

Lifting Instructions

Fully lower the platform. Be sure the extension
deck, controls and component trays are secure.
Remove all loose items on the machine.
Determine the center of gravity of your machine
using the table and the picture on this page.
Attach the rigging only to the designated lifting
points on the machine. There are two 2.5 cm holes
on the front of the machine and two holes in the
ladder for lifting.
Adjust the rigging to prevent damage to the
machine and to keep the machine level.

Center of Gravity Table

Model
GS-1530
GS-1532
GS-1930
GS-1932
GS-2032
GS-2632
GS-3232
GS-2046
GS-2646
GS-3246
GS-4047
Part No. T107026
Transport and Lifting Instructions
X Axis Y Axis
49.8 cm 47.2 cm
49.8 cm 47.2 cm
50.8 cm 49.5 cm
50.8 cm 49.5 cm
80.9 cm 53.9 cm
82.2 cm 59.3 cm
78.7 cm 67.3 cm
82.7 cm 56.8 cm
88.2 cm 56.4 cm
83.7 cm 59.9 cm
85.8 cm 51.5 cm
GS-30 • GS-32 • GS-46 • GS-47
Operator's Manual
71