Genie GS-1930 Operator's Manual page 28

Operator's Manual
Controls
12 Platform up OR outrigger retract button
Press and hold this button and the
platform will raise OR the
outriggers will retract.
13 Platform down OR outrigger extend button
Press and hold this button and the
platform will lower OR the
outriggers will extend.
14 Outrigger indicator lights
During outrigger extension,
lights flash green. As each
outrigger contacts the ground,
lights turn solid green. Any
time the outrigger extension
procedure is interrupted, the
lights will flash green indicating
the outriggers are not
contacting the ground or the
outriggers are not fully
deployed. During outrigger
retraction lights turn solid
green. As each outrigger fully
retracts, lights turn off. Lights
will turn solid red, indicating
the corresponding outrigger is
at end of stroke.
15 Lift function button
Push this button to activate the lift
function.
26
16 Proportional control handle and function
enable switch for drive, steer, lift and outrigger
functions
Lift function: Press and hold the function
enable switch to enable the lift function on the
platform control handle. Move the control
handle in the direction indicated by the blue
arrow and the platform will raise. Move the
control handle in the direction indicated by the
yellow arrow and the platform will lower. The
descent alarm should sound while the platform
is lowering.
Drive function: Press and hold the function
enable switch to enable the drive function on
the platform control handle. Move the control
handle in the direction indicated by the blue
arrow on the control panel and the machine
will move in the direction that the blue arrow
points. Move the control handle in the direction
indicated by the yellow arrow on the control
panel and the machine will move in the
direction that the yellow arrow points.
Outrigger function: Press and hold the function
enable switch to enable the outrigger function
on the platform control handle. Move the
control handle in the direction indicated by the
blue arrow and the outriggers will retract. Move
the control handle in the direction indicated by
the yellow arrow and the outriggers will extend.
GS-30 • GS-32 • GS-46 • GS-47
Sixth Edition • Ninth Printing
Part No. T107026