To Position Outriggers (Gs-3232 Models); To Steer - Genie GS-1930 Operator's Manual

Operator's Manual
Operating Instructions

To Position Outriggers (GS-3232 models)

To Extend Outriggers:
1 Press and hold the
outrigger enable
button.
2 Press and hold the foot switch (if equipped).
3 Press and hold the outrigger extend button.
The outriggers will begin to extend. The individual
outrigger indicator lights will flash green as the
corresponding outrigger extends. Continue
pressing the outrigger enable and the outrigger
extend buttons until all outrigger indicator lights
turn solid green and a long beep is heard from the
platform controls alarm. The machine is now level.
Note: If the outrigger enable and extend buttons
are released too soon during extension, the
outrigger indicator lights will continue to flash
green, indicating the outriggers are not contacting
the ground.
Note: If the outrigger lights are solid green, the
machine may not be level or the outriggers may
not be fully deployed if a long beep is not heard at
the platform controls alarm.
56
To Retract Outriggers:
1 Press and hold the
outrigger enable button.
2 Press and hold the foot switch (if equipped).
3 Press and hold the outrigger retract button.
The outriggers will begin to retract. The outrigger
indicator lights will turn solid green as the
corresponding outrigger retracts. Continue
pressing the outrigger enable and outrigger retract
buttons until all outrigger indicator lights turn off,
indicating all outriggers are completely retracted.
All machine functions are now restored.
Note: If the outrigger enable and retract buttons
are released too soon during retraction, the
outrigger indicator lights will flash green, indicating
the outriggers are not fully retracted.

To Steer

1 Press and hold the drive/steer function enable
switch on the control handle.
2 Press and hold the foot switch (if equipped).
3 Turn the steer wheels with the
thumb rocker switch located on
the top of the control handle.
GS-30 • GS-32 • GS-46 • GS-47
Sixth Edition • Ninth Printing
Part No. T107026