Buffer Tuning Points
Decide to Tune Buffers
Dell Networking recommends exercising caution when configuring any non-default buffer settings, as
tuning can significantly affect system performance. The default values work for most cases.
As a guideline, consider tuning buffers if traffic is very bursty (and coming from several interfaces). In this
case:
•
Reduce the dedicated buffer on all queues/interfaces.
•
Increase the dynamic buffer on all interfaces.
•
Increase the cell pointers on a queue that you are expecting will receive the largest number of
packets.
Using the Buffer Tuning Commands
To tune the buffer, use the following commands.
NOTE: Buffer profile queue 1 is not supported. Use default buffer profile queue 4.
•
Define a buffer profile for the FP queues.
CONFIGURATION mode
Z-Series Debugging and Diagnostics
909