Configuring Loop Guard - Dell Z9000 Configuration Manual

Figure 108. STP Loop Guard Prevents Forwarding Loops

Configuring Loop Guard

Enable STP loop guard on a per-port or per-port channel basis.
Dell Networking OS Behavior: The following conditions apply to a port enabled with loop guard:
• Loop guard is supported on any STP-enabled port or port-channel interface.
• Loop guard is supported on a port or port-channel in any spanning tree mode:
– Spanning Tree Protocol (STP)
– Rapid Spanning Tree Protocol (RSTP)
– Multiple Spanning Tree Protocol (MSTP)
– Per-VLAN Spanning Tree Plus (PVST+)
Spanning Tree Protocol (STP)
793