Dell Z9000 Configuration Manual page 413

10/25/40/50/100gbe throughput
Hide thumbs Also See for Z9000:
Table of Contents

Advertisement

Default is level-1-2.
Change the IS-type for the IS-IS process.
ROUTER ISIS mode
is-type {level-1 | level-1-2 | level-2}
Example of the show isis database Command to View Level 1-2 Link State Databases
To view which IS-type is configured, use the show isis protocol command in EXEC Privilege mode.
The show config command in ROUTER ISIS mode displays only non-default information. If you do not
change the IS-type, the default value (level-1-2) is not displayed.
The default is Level 1-2 router. When the IS-type is Level 1-2, the software maintains two Link State
databases, one for each level. To view the Link State databases, use the show isis database
command.
Dell#show isis database
IS-IS Level-1 Link State Database
LSPID
LSP Seq Num
B233.00-00
0x00000003
eljefe.00-00 * 0x00000009
eljefe.01-00 * 0x00000001
eljefe.02-00 * 0x00000001
Force10.00-00
0x00000002
IS-IS Level-2 Link State Database
LSPID
LSP Seq Num
B233.00-00
0x00000006
eljefe.00-00 * 0x0000000D
eljefe.01-00 * 0x00000001
eljefe.02-00 * 0x00000001
Force10.00-00
0x00000004
Dell#
Controlling Routing Updates
To control the source of IS-IS route information, use the following command.
Disable a specific interface from sending or receiving IS-IS routing information.
ROUTER ISIS mode
passive-interface interface
– For a 1-Gigabit Ethernet interface, enter the keyword GigabitEthernet then the slot/port
information.
– For the Loopback interface on the RPM, enter the keyword loopback then a number from 0 to
16383.
– For a port channel, enter the keywords port-channel then a number.
– For a SONET interface, enter the keyword sonet then the slot/port information.
– For a 10-Gigabit Ethernet interface, enter the keyword TenGigabitEthernet then the slot/ port
information.
– For a VLAN, enter the keyword vlan then a number from 1 to 4094.
Intermediate System to Intermediate System
LSP Checksum LSP Holdtime ATT/P/OL
0x07BF
1088
0xF76A
1126
0x68DF
1122
0x2E7F
1113
0xD1A7
1102
LSP Checksum LSP Holdtime ATT/P/OL
0xC38A
1124
0x51C6
1129
0x68DF
1122
0x2E7F
1113
0xCDA9
1107
0/0/0
0/0/0
0/0/0
0/0/0
0/0/0
0/0/0
0/0/0
0/0/0
0/0/0
0/0/0
413

Advertisement

Table of Contents
loading

Table of Contents