Important Points To Remember; Configure Bfd - Dell Z9000 Configuration Manual

10/25/40/50/100gbe throughput

Hide thumbs Also See for Z9000:

Table of Contents

receives a Down status notification from the remote system, the session state on the local system

changes to Init.

Figure 10. Session State Changes

Important Points to Remember

On the platform, Dell Networking OS supports 128 sessions per stack unit at 200 minimum transmit

and receive intervals with a multiplier of 3, and 64 sessions at 100 minimum transmit and receive

intervals with a multiplier of 4.

Enable BFD on both ends of a link.

Demand mode, authentication, and the Echo function are not supported.

BFD is not supported on multi-hop and virtual links.

Protocol Liveness is supported for routing protocols only.

This section contains the following procedures.

Configuring BFD for Physical Ports

Configure BFD for Static Routes

Configure BFD for OSPF

Configure BFD for OSPFv3

Bidirectional Forwarding Detection (BFD)