Ipv6 Neighbor Discovery Of Mtu Packets; Secure Shell (Ssh) Over An Ipv6 Transport; Configuration Tasks For Ipv6 - Dell Z9000 Configuration Manual

10/25/40/50/100gbe throughput

Hide thumbs Also See for Z9000:

Table of Contents

Figure 43. NDP Router Redirect

IPv6 Neighbor Discovery of MTU Packets

You can set the MTU advertised through the RA packets to incoming routers, without altering the actual

MTU setting on the interface.

The ipv6 nd mtu command sets the value advertised to routers. It does not set the actual MTU rate. For

example, if you set ipv6 nd mtu to 1280, the interface still passes 1500-byte packets, if that is what is

set with the mtu command.

IPv6 secure shell (SSH) is supported on the Z9000 platform.

Dell Networking OS supports both inbound and outbound SSH sessions using IPv6 addressing. Inbound

SSH supports accessing the system through the management interface as well as through a physical

Layer 3 interface.

For SSH configuration details, refer to the Security chapter in the Dell Networking OS Command Line

Interface Reference Guide.

The following are configuration tasks for the IPv6 protocol.

Adjusting Your CAM-Profile

Assigning an IPv6 Address to an Interface

Assigning a Static IPv6 Route

Configuring Telnet with IPv6

SNMP over IPv6

Showing IPv6 Information

IPv6 Routing