Table of Contents
Advertisement
All the other function keys are disable in the standard configuration.
12.1.5.1 Manual operation with the material handling (Option)
To access the material handling controls, press the button
the LCD monitor. The following icons will appear:
Second hydraulic power supply – CONTROL DISABLED
Power conveyor backward
Power conveyor forward
Transferring unit forward
Transferring unit rearward – CONTROL DISABLED
High – Low speed for roller conveyor
12.1.6 Semi automatic cycle
The operator can run a semiautomatic cycle when he needs to make only one cut.
To run a semiautomatic cycle is therefore necessary to position the material between the vises, make
sure it is firmly clamped and then press together:
To stop the cycle, press
12.1.7 Automatic cycle
12.1.7.1 Programs directory
By pushing the
gram editing. It appears a screen like the one below, in which it is possible to:
= M
AKE A NEW PROGRAM
ome
ALFA
BETA
GAMMA
Instruction & Parts Manual
SHIFT +
(program directory) the operator has full access to all the operations on pro-
located on the middle lower part of
= D
ELETE THE HIGHLIGHTED PROGRAM
= D
ELETE ALL THE PROGRAMS
G
=
O TO THE TOP OF THE PROGRAM LIST
G
=
O TO THE BOTTOM OF THE PROGRAM
LIST
Pag.27
Edition 2008-A
Advertisement
Table of Contents
