Table of Contents
Advertisement
on the index axis: press the START
button
to run the setting process,
or press the softkey "NO" if you don't
want to run it.
After this operation the machine is ready for manual operations. All the status icons such as coalant
status, band speed,... are now displayed.
While in manual mode (look at the symbol on the top left corner of the screen) it is possible to:
• Have access to all machine configuration parameters;
• Enable working cycles.
The
allows to get into the machine parameters area (most of them protected by passwords),
and the
allows to make all programming & cutting operations.
The area under the
The operator cannot modify any of the machine parameters, because this might cause severe
injuries to the operator and people around the machine.
12.1.3 Machine status icons
On the left upper corner of the display, it appears the machine status icon, which specify in which
mode or in which status the machine currently is. These icons are:
Icon
Description
Manual
Normal machine status, and allows to
operate machine manually.
Semiautomatic
The saw is making a single cut.
Automatic
The machine is running an automatic
cutting program
Editing
One program is edited at the time
12.1.4 Single components status icons
The following icons show the status of each machine part.
I
CO S
0m/m
Instruction & Parts Manual
menu must be operated only by the manufacturer or its representatives.
Band motor ON / OFF
Index movement
Inboard vise open / close / undefined / opening / closing
Index vise open / close / undefined / opening / closing
Hydraulics' ON / OFF
Head up / down fast / down slow / undefined
Coolant ON / OFF / ON in cycle
Band broken / Band OK
Blade speed control
Icon
Description
Program directory
The control is in the program di-
rectory area
Zero setting
The machine is setting the index
zero
Index positioning
Index is moving to a position.
D
ESCRIPTIO
Pag.25
Edition 2008-A
Advertisement
Table of Contents
