Table of Contents
Advertisement
12.1.5.1 Manual operation with the material handling (Option)
To access the material handling controls, press the button
the LCD monitor. The following icons will appear:
Second hydraulic power supply – CONTROL DISABLED
Power conveyor backward
Power conveyor forward
Transferring unit forward
Transferring unit rearward – CONTROL DISABLED
High – Low speed for roller conveyor
12.1.6 Semi automatic cycle
The operator can run a semiautomatic cycle when he needs to make only one cut. In fact, after fin-
ishing the cut, the machine will stop in this cycle.
To run a semiautomatic cycle is therefore necessary to position the material between the vises, make
sure it is firmly clamped and then press together:
To stop the cycle, press
12.1.7 Automatic cycle
12.1.7.1 Programs directory
By pushing the
gram editing. It appears a screen like the one below, in which it is possible to:
Nome
ALFA
BETA
GAMMA
Instruction Manual
SHIFT +
(program directory) the operator has full access to all the operations on pro-
located on the middle lower part of
= M
AKE A NEW PROGRAM
= D
ELETE THE HIGHLIGHTED PROGRAM
= D
ELETE ALL THE PROGRAMS
G
=
O TO THE TOP OF THE PROGRAM LIST
G
=
O TO THE BOTTOM OF THE PROGRAM
LIST
Pag.31
Edition A
Advertisement
Table of Contents
