Table of Contents
Advertisement
Cutting bridge falling rate (w/o material)
Bars size
Bar weight
5.5. L
IMITS USI G THE SAW
The machine has two limits of use due to :
• operator's inexperience
• material size and weight
1. The operator's experience is particularly necessary when the saw runs in manual cycle ;
2. material size and weight must be within the ones above shown.
5.6. W
ORKABLE MATERIALS
This machine can cut only metallic bars, pipes and tubing. Every other use will is considered inappropriate use of the ma-
chine.
5.7. W
ORK AREA
This machine has to work in industrial environment. It is design to make mechanical machining under human control, but
the operator presence is not required continuously.
It is recommended to keep clean and free of interference the area close to the machine.
This machine use a mixture of oil and water as coolant liquid. Thus, the working area could be slippery and dirty.
T
HIS AREA MUST BE MARKED BY A APPROPRIATE SIG AL
5.8. W
ORK PLACE
The machine has one work place in front of the control panel.
A second temporary work place is aside the vises, the register them, and to change the blade.
Each work place must be easy to reach when necessary, without interference, even temporary. The machine can work au-
tomatically without operator, who must be present during the manual operations of loading and unloading, and control the
control panel operations.
No specific illumination is required, but the work place must be well illuminated to respect the requirements set by present
safety rules.
Only authorized people and maintenance personnel should be allowed to reach the saw work place.
The operator must be equipped with personal protection instruments, like gloves and safety glasses.
5.9. C
OMMA D MODES
Instruction & Parts Manual
,
,
STOP
EMERGE CY STOP A D OUT OF SERVICE
Mt./m
3
mm
∅ 13
kg.
0
.
.
Pag.15
Edition 2008-A
30
∅ 531
1.000
Advertisement
Table of Contents
