Metal Cutting Band Saw - DoAll C-3350NC Instruction Manual

OPERATOR'S INSTRUCTION MANUAL
For your information and future reference, pertinent data concerning your
machine should be written in the spaces provided above. This information is
stamped on a plate attached to your machine. Be sure to provide machine
model and serial numbers with any correspondence or parts orders.
Specifications contained herein were in effect at the time this manual was
approved for printing. The DoALL Company, whose policy is one of continu-
ous improvement, reserves the right to change specifications or design at
any time without notice and without incurring obligations.
PLEASE READ THIS MANUAL CAREFULLY BEFORE OPERATING THE MACHINE!
The followng regstered trademarks of the DoALL Company are used n ths manual:
DoALL, Imperal B-Metal, Kleen-Kool, and Tensgage.
PRINTED IN U.S.A.

METAL CUTTING BAND SAW

MODEL FIRST SERIAL NO.
C-3350NC 566-04101
For Sales, Parts and Servce, call 1-888-362-5572
LAST SERIAL NO.
566-06151
DoALL SAWING PRODUCTS
2375B TOUHY AVENUE
ELK GROVE, ILLINOIS 60007 U.S.A.

PB-522.2 (4-08)