Standard Periodic Maintenance Schedule For The Smart View Display - Taylor-Dunn B0-248-36 Operation, T Roubleshooting And Replacement Parts Manual

SAFETY RULES AND OPERATING INSTRUCTIONS
STANDARD PERIODIC MAINTENANCE SCHEDULE
FOR THE SMART VIEW DISPLAY
NOTE: The maintenance function is optional. Your vehicle may be equipped with a customized maintenance
schedule
PREVENTATIVE MAINTENANCE SCHEDULE
MAINTENANCE
LEVEL INTERVAL
1
2
3
1, 2, 3 - See notes on following pages.
HOUR
MAINTENANCE TO BE PERFORMED
1
Inspect the brake system including the park brake and mounting
harware
Inspect the steering system, tighten the steering shaft coupler on
the steering gear input shaft
Lubricate the vehicle, check for leaks
500
Inspect safety interlocks
Inspect front and rear wheel bearings
Inspect and adjust fork collar bearings (3-wheel trucks only)
Inspect and tighten all nuts and bolts. First 500 hours and then
every 1000 hours.
Inspect and tighten all nuts and bolts
Clean and repack front wheel bearings
Inspect and tighten all wire connections
1000
Inspect the motor brushes and commutator
Inspect the king pin bushings
Check front end alignment
Change oil in the drive and rear axle
Flush hydraulic brake system
2000 Inspect suspension bushings
Replace brake pedal/treadle return spring
Inspect frame for damage
2,3
Safety Rules
Page 23