Periodic Maintenance Checklist - Taylor-Dunn SC-090-24 Operation, T Roubleshooting And Replacement Parts Manual

SAFETY RULES AND OPERATING INSTRUCTIONS

PERIODIC MAINTENANCE CHECKLIST

Preventative Maintenance Schedule for GT Drive with DC Motor
Date: ________________________
Inspected By: ________________________
Serviced By: ________________________
Interval
Inspected
1
(hours)
Operator
Daily
Checklist
500
1000
2000
Notes (1) and (2), Refer to "Maintenance Guidelines for Severe Duty" in the vehicles service manual
Note: A full page copy of the Periodic Maintenance Checklist is on the Vehicle
Documentation CD under the [Misc] sub folder.
Form PM-0001 GT Drive / DC Motor, Revision B
06/20/2007
Taylor-Dunn
Model #: ________________
Serial #:
Unit ID#: ________________
Service Service
2
Required Complete
Hour Meter: _______________
________________
Item Description
Master cylinder fluid level
Parking brake for secure hold
Battery water level
Tire inflation (pneumatic tires)
Tire tread / damage
All lights (head, tail, brake, warning, dash panel)
Steering (hard steering, excessive play, unusual noises)
Inspect brake and throttle pedal (play, binding, noise)
Horn
Motion alarm (if equipped)
Fluid leaks (brakes, rear axle, battery, hydraulic system)
Adjust service and park brake systems
Inspect all steering linkages and hardware
Tighten steering shaft to steering gear coupler (if equipped)
Lubricate the vehicle
Wash batteries and clean terminals
Inspect for fluid leaks
Check all electrical interlocks for proper operation
Inspect wheel bearings for play and noise
Inspect front fork collar bearings for play and noise
(3-wheel vehicle only)
Inspect and tighten all hardware
(first 500 hours only, then 1000 hours and every 1000 hours)
Inspect and tighten all hardware
Clean and repack front wheel bearings, replace grease seals
Inspect all electrical connections for signs of overheating
Tighten all electrical connections
Inspect all wiring for cracks, fraying or wear
Blow carbon from motor
Inspect motor brushes and commutator
Clean and lubricate motor coupler
Inspect steering king pins for play
Align front end
Change rear axle oil
Flush hydraulic brake system
Inspect suspension bushings (spring, shock)
Inspect suspension bumpers
Replace brake pedal/treadle return spring
Inspect frame for damage
Safety Rules
Page 11