Installing And Removing Hn4000 Modules; High-Speed Network Modules - Hatteras HN4000 Hardware Installation Manual

1
Installing and Removing HN4000
The HN4000 chassis has two field‐replaceable modules:
❒
high‐speed network module
❒
Cooling Unit module
Static Electricity can damage or decrease the reliability of electrical and optical equipment. While
unpacking and handling electrical and optical equipment, wear a grounding wrist strap to dis-
charge the static buildup. The grounding wrist strap is designed to prevent equipment damage
caused by static electricity. Before unpacking and installing equipment or making system intercon-
nections, connect the grounding wrist strap.
6.1

High-Speed Network Modules

An HN4000 can be configured with one of the pluggable high‐speed network modules listed in
Table 6‐1.
Table 6-1 HN4000 High-Speed Module Model Numbers
Item
Modules for HN4000's
Universal I/O Slot
Fiber Optic ports - Optical Safety. Never look at the transmit LED/laser through a magnifying
device while it is powered on. Never look directly at the fiber port or fiber cable ends when they are
powered on.
Only Class 1 lasers/LED optics may be used in the equipment.
920550-5020 Rev 14
Description
• Dual 100/1000BASE‐T Ethernet ports
• Dual 1000BASE‐X small form‐factor pluggable (SFP) Ethernet ports
• Dual 100BASE‐X small form‐factor pluggable (SFP) Ethernet ports
• Unchannelized T3/E3‐TX port supporting x.86 and GFP
Modules
HN4000 Hardware Installation Guide
6
Model Number
HN4000‐GbT
HN4000‐GbX
HN4000‐FEX
HN4000‐TE3