2-3
Installing the Rack Mounting Brackets
2.4
Installing the Rack Mounting Brackets
2.4.1 Bracket Orientation
To ensure proper mounting‐bracket installation, the HN4000 chassis is stamped "Right" and
"Left" in the bracket mounting areas. In addition, the mounting brackets are stamped "Right"
and "Left."
Figure
2‐2 shows the stamping on the right side of the chassis (highlighted). Note that the
right‐ and left‐side chassis stampings are relative to viewing the chassis from the front.
Front of Chassis
Right-Side Stamping
Right-Side Bracket with Cable-
Guide Slots (ANSI 19" Shown)
Figure 2-2
HN4000 Chassis Showing Bracket Orientation
920550-5020 Rev 14
HN4000 Hardware Installation Guide