Hn4000E Model Console Port Pin Assignments; Figure 4-10 - Rj-45 Pins For Console Port - Hatteras HN4000 Hardware Installation Manual

4.5.1 HN4000e Model Console Port Pin Assignments

Table 4‐5 and Figure
1
port.
Table 4-3
RJ-45
Pin #
1
2
3
4
5
6
7
8
The console-port connection is DCE, and the port will automatically detect whether the connection
Note
is being made with a crossover or straight-through cable.
An optional RJ‐45 to DB‐9 adapter is available from Hatteras Networks. Table 4‐4 shows the
association between the RJ‐45 and DB‐9 pins.
Table 4-4 RJ-45 to DB-9 Pin Association
HN400-U RJ-45 Pin #
3 (RxD)
5 (GND)
6 (TxD)
1. The following Cisco Systems cables can be connected to the RJ‐45 console port: 72‐3383‐01 cable or 72‐1259‐01 cable
with 74‐0495‐01 adapter. These cables are unshielded, and must not be used to permanently install a maintenance
terminal.
920550-5020 Rev 14
shows the pin assignments for the HN4000e switch model's RJ‐45 console
Console Port Pin Outs
Signal Device
I/O
N/A N/A
N/A N/A
RxD (Receive Data) Output
GND N/A
GND N/A
TxD (Transmit Data) Input
N/A N/A
N/A N/A
DB-9 Pin # (Female Connector)
2
5
3
Cabling a Maintenance Terminal
HN4000e Console Port
Figure 4-10 RJ-45 Pins for Console Port
(Facing HN4000e
HN4000 Hardware Installation Guide
4-13
)