Drive Module Without Pedestal (Option +0H354); Attaching The Drive Module To A Mounting Plate Or Wall; Attaching The Drive Module To A Mounting Plate Or Wall (Option +H391) - ABB ACS880-04 Hardware Manual

96 Installation instructions

Drive module without pedestal (option +0H354)


The drive module without pedestal can be mounted on a wall or a cabinet with four screws
through the fastening holes at the top and bottom of the module.
Make sure that the cabinet mounting plate and frame are strong enough to carry the
weight of the drive module. See section
on page 183.

Attaching the drive module to a mounting plate or wall


Use the support bracket if you attach the drive module directly to a mounting plate or wall.
The support bracket prevents the drive module screws from chafing against the plate.
M4×12 Torx
Attaching the drive module to a mounting plate or wall (option

+H391)
See chapter Step-by-step drawings for option +H391 installation example in Rittal TS 8
600 mm wide cabinet on page 251.
Dimensions, weights and free space requirements