Required Parts; Required Tools - ABB ACS880-04 Hardware Manual

130 Installation example with full cabling panels (option +H381)

Required parts

The parts are used in this installation example:
Drive module standard parts
• Drive module
• Top guide plate
• Fastening bracket
• Grounding busbar
• Pedestal guide plate
• Telescopic extraction and insertion ramp
• Fastening screws in a plastic bag
• External control unit
Drive module options
Option code Qty
(pcs)
+H381
+P905
Rittal parts / Alternative ABB parts
Rittal part code Qty
(pcs)
TS 8406.510
TS 8106.235
SZ/DK 7967.000 (one
set = four pieces) /
ABB 3AUA0000125201
(IP20)
ABB 3AUA0000114967
(IP42)
TS 8612.160
TS 8612.140
SK 3243.200 / 4 /
ABB 3AUA0000117002
(IP20)
ABB 3AUA0000117007
(IP42)
TS 4396.500
Customer-made parts (not ABB or Rittal products)
Air baffles
Cabinet bottom plate
(alternative to Rittal
support rails)

Required tools

•
Set of screw drivers (Torx and Pozidriv)
•
Set of metric magnetic-end hexagon sockets
•
Torque wrench with a 500 mm (20 in.) or 2 × 250 mm (2 × 10 in.) long extension bar
Description
1 Full power cabling panels
1 Internal control unit (inside the drive module)
Description
1 Enclosure without mounting plate, bottom plates and side panels.
1 Side panels for the cabinet
1 Spacers for roof plate / ABB roof
Note: For alternative ABB outlet kits, see section
5 Punched section with mounting flange, outer mounting level for 600 mm
horizontal
3 Punched section with mounting flange, outer mounting level for 400 mm
horizontal
Air filter 323 mm × 323 mm. Remove the filter mat according to the
manufacturer's instructions.
2
Note: For alternative ABB air filters, see section
3 Support rail (alternative to a customer-made bottom plate)
2 See section Air baffles for option +H381 in Rittal TS 8 400 mm wide cabinet
installation on page 216
required in the cabinet.
1 See section Bottom plate for option +H381 in Rittal TS 8 400 mm wide
cabinet installation on page
made bottom plate.
Air outlet kits
Air inlet kits
for the dimension drawings of the air baffles
213 for the dimension drawing of a customer-
on page 169.
page 167.