ABB ACS880-04 Hardware Manual page 150

150 Start-up
•
For drives with resistor braking (option +D151), see also section
236.
•
For option +N7502, see also ACS880 drives with SynRM motors (option +N7502)
supplement (3AUA0000145506 [English]).
•
For drives with ABB du/dt filter, check that bit 13 of parameter 95.20 HW options
word 1 is switched on.
•
For drives with ABB sine filter, check that parameter 95.15 Special HW settings
is set to ABB sine filter. For other sine filters, see Sine filter hardware manual
(3AXD50000016814 [English]).
5. For drives with ABB motors in explosive atmospheres, see also ACS880 drives with
ABB motors in explosive atmospheres (3AXD50000019585 [English]).
6. For drive modules in which the Safe torque off function is in use: Test and validate the
operation of the Safe torque off function. See section
test on page 227.
7. For drive modules with an FSO-xx safety functions module (options +Q972 and
Q973): Test and validate the operation of the safety functions. See the delivery-
specific circuit diagrams and FSO-12 safety functions module user's manual
(3AXD50000015612 [English]) or FSO-21 safety functions module user's manual
(3AXD50000015614 [English]).
Start-up
Start-up including acceptance
on page