Required Parts; Required Tools; Overall Flowchart Of The Installation Process - ABB ACS880-04 Hardware Manual

122 Installation example of the standard drive module configuration

Required parts

Drive module standard parts
• Drive module
• Fastening bracket
• Pedestal guide plate
• Telescopic extraction and insertion ramp
• Fastening screws and insulators in a plastic bag
• External control unit
Rittal parts / Alternative ABB parts
Rittal part code
(pcs)
TS 8606.500
TS 7967.000
(one set = four pieces) /
ABB 3AUA0000117003
(IP20)
ABB 3AUA0000117008
(IP42)
TS 8612.160
TS 4396.500
SK 3243.200 /
ABB 3AUA0000117003
(IP20)
ABB 3AUA0000117008
(IP42)
Customer-made parts (not ABB or Rittal products)
Air baffles

Required tools

•
Set of screw drivers (Torx and Pozidriv)
•
Set of metric magnetic-end hexagon sockets
•
Torque wrench
•
Step drill bit for drilling the holes in the clear plastic shroud for input power cables.

Overall flowchart of the installation process

Step Task
1 Install the Rittal parts, drive bottom guide plate
and loose drive options in the drive module
cubicle.
2 Install the auxiliary components (such as
mounting plates, air baffles, switches, busbars
etc.).
Attach the drive module to the cabinet
3 Connect the power cables and clear plastic
shrouds to the drive module.
Qty Description
1 Enclosure without mounting plate, bottom plates and side panels.
1 Spacers for roof plates. / ABB roof
Note: For alternative ABB outlet kits, see section
169.
5 Punched section with mounting flange, outer mounting level for 600 mm
horizontal
Support rails
4 / Air filter 323 mm × 323 mm. Remove the filter mats. For alternative ABB
air filters, see section Air inlet kits
2
2 See section Preventing the recirculation of hot air
Air outlet kits
page 167.
on page 54.
For instructions, see
Installing the drive module into a cabinet
page 123 and installation drawings on page
243.
The component manufacturer's instructions
Preventing the recirculation of hot air
54.
Step-by-step drawings for an installation
example of standard drive configuration with
option +E208 in Rittal TS 8 600 mm wide
cabinet on page 243.
Connecting the power cables and installing the
shrouds on page 123
on page
on
on page