Drive Module Without Output Cable Connection Terminals (Option +0H371); Drive Module Without Pedestal (Option +0H354) - ABB ACS580-04 Hardware Manual

74 Installation instructions
Install the metallic shroud with ground bar as shown below.
Combi screw M4×8
Torx T20 2 N·m
Drive module without output cable connection terminals (option

+0H371)
The power cables can be connected directly to the drive module input and output terminals
with cable lugs or by busbars.

Drive module without pedestal (option +0H354)


The drive module without pedestal can be mounted on a wall or a cabinet with four screws
through the fastening holes at the top and bottom of the module.
Make sure that the cabinet mounting plate and frame are strong enough to carry the
weight of the drive module. See section
on page 116.
Dimensions, weights and free space requirements
3AXD50000017460