Fastening The Control Cable Clamp Plate - ABB ACS880-04 Hardware Manual
200 to 710 kw, 300 to 700 hp
Hide thumbs
Also See for ACS880-04:
- Hardware manual (418 pages) ,
- Quick installation and start-up manual (274 pages) ,
- Quick installation manual (92 pages)
Table of Contents
Advertisement
102 Installation instructions
Fastening the control cable clamp plate
Fasten the control cable clamp plate either to the top or base of the control unit with four
screws as shown below.
Note: If you install the FSO-xx safety functions module above the control unit, fasten the
control cable clamp plate on the base of the control unit. See section
safety functions module (options +Q972 and +Q973)
on page 117.
0.7 N·m
(6.2 lbf·in)
Installing the FSO
Hide quick links:
Advertisement
Table of Contents
