ABB ACS880-04 Hardware Manual page 26

26 Introduction to the manual
Standard drive modules
• Install the additional components into the cabinet: for
example, main disconnector, main contactor, main AC
fuses, etc..
• Install the drive module into the cabinet.
• Connect the motor cables to the drive module terminals.
• Connect the brake resistor and DC connection cables (if
any) to the drive module terminals.
• If the main disconnector is installed into the cabinet,
connect it to the drive module terminals and the input
power cabling to the disconnector.
• Connect the cables from the drive module to the external
control unit and install the control unit into the cabinet.
Drive modules with optional cabling panels (+H381)
• Install the cabling panels into the cabinet.
• Install the additional components into the cabinet: for
example, main disconnector, main contactor, main AC
fuses, etc..
• If the main disconnector is installed into the cabinet,
connect the input power cabling to it.
• Connect the input power cables and motor cables to the
cabling panel terminals.
• Connect the brake resistor and DC connection cables (if
any) to the cabling panel terminals.
• Install the drive module into the cabinet.
• Fasten the cabling panel busbars to the drive module
busbars.
• Drive modules with an external drive control unit: Connect
the cables from the drive module to the control unit and
install the control unit into the cabinet.
Drive modules without full-size output cable connection
terminals (option +0H371) and IP20 shrouds (option
+0B051):
• Install the additional components into the cabinet: for
example, main PE busbar, main disconnector, main
contactor, main AC fuses, etc..
• Install the drive module into the cabinet.
• Connect the power cabling between the drive module and
the rest of the main circuit components in the cabinet (if
any).
• Connect the input power cables and motor cables to the
drive cabinet.
• Connect the brake resistor and DC connection cables (if
any) to the drive cabinet.
Drive modules with an external drive control unit: Connect
the cables from the drive module to the control unit and
install the control unit into the cabinet.
Task See
Installing the drive module into a cabinet
123)
Connecting the power cables and installing the
shrouds (page 123)
Connecting the external control unit to the drive
module (page 103)
Mounting the external control unit
Manuals for any optional equipment
Installing the mechanical accessories into the
cabinet (page 131)
Modular design of Rittal TS8 cabinets
143)
Connecting the power cables
Installing the drive module into the cabinet
(page 135)
Connecting the external control unit to the drive
module (page 103)
Mounting the external control unit
Manuals for any optional equipment
Installing the mechanical accessories into the
cabinet (page 131)
Connecting the power cables
Installing the drive module into the cabinet
(page 135)
Connecting the external control unit to the drive
module (page 103)
Mounting the external control unit
Manuals for any optional equipment
(page
(page 105)
(page
(page 98)
(page 105)
(page 98)
(page 105)