3.1.5 Installation of the Inverter with Nema1 Kit (Option, CFW11....T...ON1...) on a Wall
Fixing holes position and diameter according to the
External dimensions of the inverter with Nema1 kit according to the
Fasten the inverter.
Install the Nema1 kit top on the inverter as showed in the
supplied with the product.
3.1.6 Access to the Control and Power Terminal Strips
It is necessary to remove the keypad (HMI) and the control rack cover in order to get access to the control
terminal strip (see
Figure 3.6 on page
bottom front cover (see
1
Figure 3.5 - Installation of the Nema1 kit top ("hat")
3-7). In order to get access to the power terminal strip, remove the
Figure 3.7 on page
3-8).
2
Figure 3.6 - HMI and control rack cover removal
Installation and Connection
Figure 3.1 on page
3-3.
Section 8.6 NEMA1 KIT on page
Figure 3.5 on page 3-7
3
8-11.
using the 2 M8 screws
CFW-11 | 3-7
3