Start-Up; Password Setting In P0000 - WEG CFW-11 User Manual

First Time Power-Up and Start-Up

5.2 START-UP

The start-up procedure for the V/f is described in three simple steps by using the Oriented Start-up routine
and the Basic Application group.
Steps:
1. Set the password for parameter modification.
2. Execute the Oriented Start-up routine.
3. Set the parameters of the Basic Application group.

5.2.1 Password Setting in P0000

5
5-2 | CFW-11
Step Action/Result
1 - Monitoring mode
- Press"Menu"
(rigth soft key)
2 - Group "00 ALL
PARAMETERS" is already
selected
- Press "Select"
3 - Parameter "Access to
Parameters P0000: 0" is
already selected
- Press "Select
4 - To set the password,
press the Up Arrow
until number 5 is displayed in
the keypad
5 - When number 5 is displayed
in the keypad, press "Save"
6 - If the setting has been
properly performed, the
keypad should display
"Access to Parameters
P0000: 5"
- Press "Return"
(left soft key)
7 - Press "Return"
8 - The display returns to the
Monitoring mode
Figure 5.1 - Steps for allowing parameters modification via P0000
Display Indication
Ready 0rpm
LOC
0 rpm
0.0 A
0.0 Hz
15:45 Menu
Ready 0rpm
LOC
00 ALL PARAMETERS
01 PARAMETER GROUPS
02 ORIENTED START-UP
03 CHANGED PARAMETERS
Return 15:45 Select
Ready 0rpm
LOC
Access to Parameters
P0000: 0
Speed Reference
P0001: 90 rpm
Return 15:45 Select
Ready 0rpm
LOC
P0000
Access to Parameters
0
Return 15:45 Save
Ready 0rpm
LOC
P0000
Access to Parameters
5
Return 15:45 Save
Ready LOC 0rpm
Access to Parameters
P0000: 5
Speed Reference
P0001: 90 rpm
Return 15:45 Select
Ready LOC 0rpm
00 ALL PARAMETERS
01 PARAMETER GROUPS
02 ORIENTED START-UP
03 CHANGED PARAMETERS
Return 15:45 Select
Ready 0rpm
LOC
0 rpm
0.0 A
0.0 Hz
15:45 Menu