Removal Of The Cable Passage Plate - WEG CFW-11 User Manual

Installation and Connection
1 2
3
4
5
3
Figure 3.9 - Removal of the Nema1 kit bottom front cover at the CFW11 0180 T 2 O N1, CFW11 0211 T 2 O N1,
CFW11 0180 T 4 O N1 and CFW11 0211 T 4 O N1 inverters in order to get access to the power terminal block

3.1.7 Removal of the Cable Passage Plate

When it is not necessary neither IP20 nor Nema1 protection degree, the cable passage plate may be removed
in order to make the inverter electric installation easier. Remove the 4 M4 screws, according to the procedure
presented in the Figure 3.10 on page 3-9.
3
1 2
Figure 3.10 - Removal of the cable passage plate
CFW-11 | 3-9