Identification Of The Power And Grounding Terminals; Power/Grounding Wiring And Fuses - WEG CFW-11 User Manual

3.2.1 Identification of the Power and Grounding Terminals

R/L1, S/L2, T/L3: AC power supply.
U/T1, V/T2, W/T3: motor connection.
DC+: this is the positive potential terminal in the DC Link circuit.
BR: braking resistor connection.
DC-: this is the negative potential terminal in the DC Link circuit.
(b) IP55 with disconnector switch

3.2.2 Power/Grounding Wiring and Fuses

ATTENTION!
Use proper cable lugs for the power and grounding connection cables.
Ground
(4 x M8, 4 x M5)
(a) IP20/Nema1
Ground
(2 x M8, 2 x M5)
Figure 3.12 - Grounding and power terminals
Installation and Connection
(c) IP55 without disconnector switch
CFW-11 | 3-11
3