WEG CFW-11 User Manual page 95

Option Kits and Accessories
WEG Part
Name
Number
11008162 IOA-01
11008099 IOB-01
11008100 ENC-01
11008101 ENC-02
11008102 RS485-01
11008103 RS232-01
11008104 RS232-02
11008105 CAN/RS485-01 CAN and RS-485 interface module (CANopen/DeviceNet/Modbus)
11008106 CAN-01
11008911 PLC11-01
11008158 DEVICENET-05
10933688 ETHERNET/IP-05 EtherNet/IP interface module
11550476 MODBUSTCP-05 Modbus TCP interface module
11550548 PROFINETIO-05 PROFINET IO interface module
11008107 PROFDP-05
11008161 RS485-05
11008160 RS232-05
11719952 MMF-03
11008913 HMI-01
11010521 RHMIF-01
11010298 HMID-01
10950192 HMI CAB-RS-1M 1 m serial remote keypad cable set
10951226 HMI CAB-RS-2M 2 m serial remote keypad cable set
10951223 HMI CAB-RS-3M 3 m serial remote keypad cable set
10951227 HMI CAB-RS-5M 5 m serial remote keypad cable set
10951240 HMI CAB-RS-7.5M 7.5 m serial remote keypad cable set
10951239 HMI CAB-RS-10M 10 m serial remote keypad cable set
10960842 KN1E-01
10960850 KN1E-02
10960844 PCSE-01
10960847 CCS-01
7 10960846 CONRA-01
11337710 KME-01
(1) Refer to the PLC module manual.
(2) Refer to the Anybus-CC communication manual.
(3) Refer to the programming manual.
(4) Use DB-9 pin, male-to-female, straight-through cable (serial mouse extension type) for connecting the keypad to the inverter or Null-Modem
standard cable. Maximum cable length: 10 m (33 ft).
Examples:
- Mouse extension cable - 1.80 m (6 ft); Manufacturer: Clone.
- Belkin pro series DB9 serial extension cable 5 m (17 ft); Manufacturer: Belkin.
- Cables Unlimited PCM195006 cable, 6 ft DB9 m/f; Manufacturer: Cables Unlimited.
(5) Refer to the Section 8.6 NEMA1 KIT on page 8-11
(6) Inverters with serial number below 1011361739 use MMF-01 control card.
(7) The MMF-03 module has a reserved space for the user (for example: write the application software version SoftPLC).
7-4 | CFW-11
Table 7.1 - Accessory models
Control Accessories for Installation in the Slots 1, 2 and 3
IOA module: 1 voltage/current analog input (14 bits); 2 digital inputs; 2
voltage/current analog outputs (14 bits); 2 open-collector digital outputs
IOB module: 2 isolated analog inputs (voltage/current); 2 digital inputs; 2
isolated analog outputs (voltage/current) (the programming of the outputs is
identical as in the standard CFW-11); 2 open-collector digital outputs
5 to 12 Vdc incremental encoder module, 100 kHz, with an encoder signal repeater
5 to 12 Vdc incremental encoder module, 100 kHz
RS-485 serial communication module (Modbus)
RS-232C serial communication module (Modbus)
RS-232C serial communication module with DIP-switches for programming
the microcontroller FLASH memory
CAN interface module (CANopen/DeviceNet)
PLC module
Anybus-CC Accessories for Installation in the Slot 4
DeviceNet interface module
Profibus DP interface module
RS485 (passive) interface module (Modbus)
RS232 (passive) interface module (Modbus)
Flash Memory Module for Installation in the Slot 5 – Factory Settings Included
FLASH memory module
Stand-alone HMI, Blank Cover, and Frame for Remote Mounted HMI
Stand-alone HMI (4)
Remote HMI frame kit IP65
Blank cover for the HMI slot
Nema1 kit for the frame size E models CFW11 0142 T 2, CFW11 0105 T 4 and
CFW11 0142 T 4 (standard for N1 option)
Nema1 kit for the frame size E models CFW11 0180 T 2, CFW11 0211 T 2,
CFW11 0180 T 4 and CFW11 0211 T 4 (standard for N1 option)
Kit for power cables shielding - frame E (included in the standard product)
Kit for control cables shielding (included in the standard product)
Control rack (containing the CC11 control board)
Frame size E movement kit
for more details.
Description
Miscellaneous
(5)
Identification
Parameters
Slot
P0027
1 FD--
1 FA--
2 --C2
2 --C2
3 ----
3 ----
3 ----
3 ----
3 ----
1, 2 and 3 ----
4 ----
4 ----
4 ----
4 ----
4 ----
4 ----
4 ----
(6)
5 ----
HMI -
- -
HMI -
- -
- -
- -
- -
- -
- -
- -
- -
(5)
- -
- -
- -
- -
P0028
----
----
----
----
CE--
CC--
CC--
CA--
CD--
(1)(3)
--xx
(2)(3)
--xx
--xx (2)(3)
--xx (2)(3)
(2)(3)
--xx
(2)(3)
--xx
--xx (2)(3)
(2)(3)
--xx
--xx (7)
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-