Log - Danfoss ECL Comfort 310 Operating Manual

Operating Guide ECL Comfort 310, application P318

7.4 Log

This section describes the function in general for the ECL Comfort
210 / 296 / 310 series. The shown displays are typical and not
application related. They might differ from the displays in your
application.
The log function (temperature history) allows you to monitor the
logs of today, yesterday, the past 2 days as well as the past 4 days
for the connected sensors.
There is a log display for the relevant sensor, showing the measured
temperature.
The log function is only available in the 'Common controller
settings'.
Example 1:
1 day log for yesterday showing the development in outdoor
temperature during the past 24 hours.
Example 2:
Today's log for the actual heating flow temperature as well as the
desired temperature.
Example 3:
Yesterday's log for the DHW flow temperature as well as the desired
temperature.
Danfoss District Energy VI.JM.Q3.02
DEN-SMT/DK 97