Charge T - Danfoss ECL Comfort 310 Operating Manual

Operating Guide

6.2 Charge T

MENU > Event > Charge T
MENU > Event > Tank temperature
MENU > Event > DHW flow T
MENU > Event > Supply T
Upper difference
Circuit
All
The event is registered if the temperature in question increases more than
the set difference (acceptable temperature difference above the desired
temperature). See also 'Delay'.
* See Appendix "Parameter ID overview"
OFF: The event function is not active.
Value: The event function is active if the actual temperature
gets above the acceptable difference.
MENU > Event > Charge T
MENU > Event > DHW flow T
Event priority 22
Circuit
All
The event number and priority possibilities.
The event can be activated if the controlled temperature S3 has been too
high for more than the set "Delay" time.
* See Appendix "Parameter ID overview"
0:
Log of event not active
1:
Log of event in list
2:
Log of event in list and notice (letter symbol in display)
3:
Log of event in list and alarm (bell symbol in display and
activation of alarm output)
MENU > Event > Charge T
MENU > Event > Tank temperature
MENU > Event > DHW flow T
Lower difference
Circuit
All
The event is registered if the temperature in question decreases more than
the set difference (acceptable temperature difference below the desired
temperature). See also 'Delay'.
* See Appendix "Parameter ID overview"
OFF:
The event function is not active.
Value: The event function is active if the actual temperature
gets below the acceptable difference.
Danfoss District Energy
ECL Comfort 310, application P318
1x147
Setting range Factory setting
*
9022
Factory setting
Setting range
*
1x148
Setting range Factory setting
*
Upper difference
Y
*
=
X Time
=
Y Temperature
=
# 1 # Upper difference
=
# 2 # Desired temperature
*
Lower difference
Y
*
=
X Time
=
Y Temperature
=
# 1 #
Lower difference
=
# 2 # Desired temperature
VI.JM.Q3.02
# 1 #
# 2 #
X
# 1 #
# 2 #
X
DEN-SMT/DK 81