Danfoss ECL Comfort 310 Operating Manual page 20

Operating Guide
Mounting on a wall
Mount the base part on a wall with a smooth surface. Establish the
electrical connections and position the controller in the base part.
Secure the controller with the locking pin.
Mounting on a DIN rail (35 mm)
Mount the base part on a DIN rail. Establish the electrical
connections and position the controller in the base part. Secure
the controller with the locking pin.
Dismounting the ECL Comfort controller
In order to remove the controller from the base part, pull out the
locking pin by means of a screwdriver. The controller can now be
removed from the base part.
20 DEN-SMT/DK
ECL Comfort 310, application P318
The easy way to lock the controller to its base or unlock it is to use a
screw driver as lever.
The easy way to lock the controller to its base or unlock it is to use a
screw driver as lever.
VI.JM.Q3.02
Danfoss District Energy