Understanding The Controller Display - Danfoss ECL Comfort 310 Operating Manual

Operating Guide

3.2 Understanding the controller display

This section describes the function in general for the ECL Comfort
210 / 296 / 310 series. The shown displays are typical and not
application related. They might differ from the displays in your
application.
Choosing a favorite display
Your favorite display is the display you have chosen as the default
display. The favorite display will give you a quick overview of the
temperatures or units that you want to monitor in general.
If the dial has not been activated for 20 min., the controller will
revert to the overview display you have chosen as favorite.
Setting the desired DHW temperature
The desired DHW temperature can easily be adjusted in the
overview displays for the DHW circuit.
Action: Purpose:
Desired DHW temperature
Confirm
Adjust the desired DHW temperature
Confirm
In addition to the information about desired and actual DHW
temperature, the today's schedule is visible.
The display example indicates that the controller is in scheduled
operation and in comfort mode.
Danfoss District Energy
ECL Comfort 310, application P318
Examples:
50
55
To shift between displays: Turn the dial until you reach the display
selector ( ) at the bottom right side of the display. Push the dial and
turn to choose your favorite overview display. Push the dial again.
VI.JM.Q3.02
DEN-SMT/DK 47