Danfoss ECL Comfort 310 Operating Manual page 3

Operating Guide
The B-type is operated by means of the remote control unit
ECA 30 / 31:
• ECA 30 (code no. 087H3200)
• ECA 31 (code no. 087H3201)
Internal I/O modules:
• ECA 32 (code no. 087H3202)
• ECA 35 (code no. 087H3205)
Base part for ECL Comfort 310, 230 volt and 24 volt: Code no.
087H3230.
Additional documentation for ECL Comfort 210 and 310, modules
and accessories is available on http://heating.danfoss.com/.
Danfoss District Energy
ECL Comfort 310, application P318
Safety Note
To avoid injury of persons and damages to the device, it is absolutely
necessary to read and observe these instructions carefully.
Necessary assembly, start-up, and maintenance work must be
performed by qualified and authorized personnel only.
Local legislations must be respected. This comprises also cable
dimensions and type of isolation (double isolated at 230 V).
A fuse for the ECL Comfort installation is max. 10 A typically.
The ambient temperature ranges for ECL Comfort in operation are:
ECL Comfort 210 / 310: 0 - 55 °C
ECL Comfort 296: 0 - 45 °C.
Exceeding the temperature range can result in malfunctions.
Installation must be avoided if there is a risk for condensation (dew).
The warning sign is used to emphasize special conditions that should
be taken into consideration.
This symbol indicates that this particular piece of information should
be read with special attention.
Application keys might be released before all display texts are
translated. In this case the text is in English.
VI.JM.Q3.02
DEN-SMT/DK 3